Rigel-systems Skylite Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Dispositivos óticos Rigel-systems Skylite. Rigel Systems Skylite User Manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 2
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop over
thumb knob.
Operation: Push thumbwheel forward or
backward to light, center position is off.
Low battery Indication: White LEDs don't
light, Red LEDs light dimly. This is normal
as white LEDs require higher voltage.
How to change the battery:
1) Unscrew thumb knob at bottom of battery
cover.
2) Remove battery cover and note sealing
ring location.
3) Remove battery and install new 9 volt
battery with positive pole of battery
against battery spring marked +.
(we recommend Alkaline or Lithium for
long life)
4) Verify sealing ring is on ledge & install
battery cover.
5) Screw in thumb knob clockwise until tight.
How to attach lanyard: Stretch loop
over thumb knob.
Vista de página 0
1 2

Resumo do Conteúdo

Página 1

™ Operation: Push thumbwheel forward or backward to light, center position is off. Low battery Indication: White LEDs don't light, Red LEDs li

Página 2

5 Year limited warranty: Rigel Systems, 26850 Basswood, Rancho Palos Verdes CA, 90275 warrants to the original consumer purchaser of its pro

Comentários a estes Manuais

Sem comentários